RESEARCH ON METHODS TO IMPROVE THE TORQUE CHARACTERISTICS OF SWITCHED RELUCTANCE MOTORS
DOI:
https://doi.org/10.62985/j.huit_ojs.vol26.no2E.395Từ khóa:
Switched reluctance motor, SRM, torque of SRM, Ansys MaxwellTóm tắt
Switched reluctance motor (SRM) is a motor with many outstanding advantages, with simple structure, low manufacturing cost because the rotor has no winding and permanent magnets. Therefore, SRM is increasingly widely used in industries, especially with the trend of saving energy and the strong development of vehicles with electric motors as today. The article proposes a solution to improve the torque of reluctance motors by examining the influence of the motor's magnetic poles or combining it with the magnetic circuit optimization method; Applying MATLAB simulink and Ansys maxwell software to evaluate the results.
Tài liệu tham khảo
[1] R. Krishnan, Switched Reluctance Motor Drives: Modeling, Simulation, Analysis, Design, and Applications (1st ed.). CRC Press, 2001, doi: https://doi.org/10.1201/9781420041644.
[2] N. P. Hoang, T. D. Quang, and P. H. Hung, ‘‘Switched reluctance motor design process”, Journal of Science and Technology, The University of Da Nang, No. 11 (132), pp. 59-63, 2018.
[3] H. Chen and J. J. Gu, “Implementation of the three-phase switched reluctance machine system for motors and generators”, IEEE Transactions on Power Electronics, vol. 15, no. 3, pp. 421-432, 2010. doi: https://doi.org/10.1109/TMECH.2009.2027901.
[4] Y. K. Choi and C. S. Koh, “Pole shape optimization of switched reluctance motor for reduction of torque ripple,” in 2006 12th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC), Miami, FL, USA, 2006, pp. 335-335, doi: https://doi.org/10.1109/CEFC-06.2006.1633125.
[5] M. Šušota and P. Rafajdus, Design influence on torque ripple in Switched Reluctance Motor (SRM), Faculty of Electrical Engineering, Department of Power Electrical Systems, Žilina, Slovakia, 2010.
[6] N. Salunke, A. Patel, and, T. Panchal, “Torque ripple reduction of switched reluctance motor by changing the rotor pole tip radius”, International Journal of Recent Technology and Engineering (IJRTE), vol. 8, no. 4, pp. 2251-2255, Nov. 2019, doi: https://doi.org/10.35940/ijrte.D7920.118419.
[7] Siemens, “Data Sheet for Three-phase Squirrel-Cage-Motors, model: 1LA7083-4AA10”, Siemens AG, Tech. Rep., 2020.
[8] X. D. Xue, K. W. E. Cheng, and S. L. Ho, “Optimization of Torque Sharing Functions for Torque Ripple Multi-Objective Optimization of Switched Reluctance Motor Drives,” IEEE Transactions on Magnetics, vol. 24, no. 9, pp. 2076-2090, 2009, doi: https://doi.org/10.1109/TPEL.2009.2019581.
[9] K. Bieńkowski, J. Szczypior, B. Bucki, A. Biernat, and A. Rogalski, Influence of Geometrical Parameters of Switched Reluctance Motor on Electromagnetic Torque, Institute of Electrical Machines, Warsaw University of Technology, Poland, 2004.
[10] P. Upadhayay and K. R. Rajagopal, “Torque ripple reduction using magnet pole shaping in a surface mounted Permanent Magnet BLDC motor,” in Proceedings of 2013 International Conference on Renewable Energy Research and Applications (ICRERA), Madrid, Spain, 2013, pp. 606-611, doi: https://doi.org/10.1109/ICRERA.2013.6749809
